Etches and primes at the same time

Suitable for use on ferrous or non-ferrous metals

Specially developed to allow notoriously difficult surfaces to be painted: Aluminium, Stainless Steel, Fibreglass, Galvanised, treated or untreated steel

Microscopically impregnates and etches the first few microns of the surface promoting excellent paint adhesion and a firm foundation for the top coat of paint

Ideal for restoration and refurbishment projects

Quick drying anti-corrosive formula

• Can Size: 250ml
• Primer Colour: Grey
• Application: Brush on

 Instructions

IMPORTANT – Read all the information on the tin before using this product.

Preparation

The surface needs to be clean and free from all traces of dust, rust, silicone, polish, wax, dirt, grease etc.

Make sure the surface is dry.

Apply in a well-ventilated, warm, dry, dust free area.

For best results ensure the paint and the surface you are painting are at room temperature, approx. 17-25°C.

Do not apply in cold, damp, humid conditions.

COMPATIBILITY TEST: We recommend you perform a test on a small inconspicuous area to ensure you are happy with the performance and colour of the product.

Application

Apply 1 or 2 thin coats, do not apply a heavy coat.

Leave first coat to dry for about 30 minutes. Apply a second coat if needed.

The primer will be fully dry after approx. 1 hour. *

Drying times are dependent on the number and thickness of coats applied, and the ambient temperature at the time of application.

After use clean brush with white spirit.