PRODUCT DESCRIPTION
Silverhook Stoneguard is an underbody coating based on synthetic resins and rubbers. This coating is quickly‐drying and especially developed for a long‐term gravel protection of front and rear aprons, sills, wheel arches, etc..

This product is very thixotropic and can be applied drip‐free. Furthermore, this product has a good stitch and can be painted over with any kind of lacquer system when the film is completely hardened. Drying can take place in the air and also in the oven. After application the result will be a closed, elastic and structured film with excellent rust ‐ and gravel protection. Silverhook Stoneguard also reduces the noise inside cars because of the sound damping property. 

APPLICATION: 
Surface must be clean, rust‐free and dry. Shake the can well before use. Application pressure = 5‐7 bar. Recommended thickness = approximately 1 mm at application. For painting with synthetic paint, allow surface to harden. For painting with 2‐component and nitropaint, allow surface to completely harden. Thinly apply 2‐component and nitropaints and reapply after sufficient drying 
time.  

Important: Do not spray on the exhaust or brake systems, as well as motor or movable parts. After use, thoroughly rinse the pistol with solvent. Do not block the air valve at the base of the pistol. Clogged pistol can cause can to explode. 

REMOVAL: 
Silverhook Stoneguard can be removed with solvents such as white spirit, high boiling point 
naphtha, xylene, toluene, etc.